Don't panic
May 5, 03:26 PM
slow day today. i was hoping we could get a couple of rounds in.
Tomtomnovice
Jan 23, 12:06 PM
I am new to this forum, and a true novice with tomtom and car kits. I just downloaded the application onto my iPhone, and then setup the car kit. It works fine. What I have is probably what sounds like the dumbest of questions:
What is the car kit's resistance to cold temperatures? I live in Cleveland, OH and if I live the mount in the car for a whole day during winter, will the chips or anything be damaged?
Do you advice dismounting the kit every time I park for a few hours, and/or for the night? My garage is not heated.
Thanks!
What is the car kit's resistance to cold temperatures? I live in Cleveland, OH and if I live the mount in the car for a whole day during winter, will the chips or anything be damaged?
Do you advice dismounting the kit every time I park for a few hours, and/or for the night? My garage is not heated.
Thanks!
The Monkey
Apr 7, 10:17 AM
I see the short sighted Apple pom-pom shakers are once again giddy with excitement. The juvenile remarks are embarrassing.
For some strange reason you think monopolies are good for consumers.
^This.
Unfortunately, most posters here think Apple always acts in the best interests of its customers. Kind of cute, actually.
For some strange reason you think monopolies are good for consumers.
^This.
Unfortunately, most posters here think Apple always acts in the best interests of its customers. Kind of cute, actually.
EDH667
Jan 25, 07:36 AM
Regarding using a case with the tom tom kit--I bought a casemate (comes shiny and somewhat rubberized) and it fits fine in my tomtom car kit.
check out the website. maybe it's a solution for you.
I have used the Case-Mate Barley-There and am currently using the Marware MicroShell with the TomTom car kit. They both work fine.
check out the website. maybe it's a solution for you.
I have used the Case-Mate Barley-There and am currently using the Marware MicroShell with the TomTom car kit. They both work fine.
Pngwyn
Apr 11, 12:22 AM
The answer is most definitely 2.
PEMDAS + left to right.. written the way it is.. the answer should be 2.
The only way it would be 288 is if it was written:
48/[2(9+3)]
PEMDAS + left to right.. written the way it is.. the answer should be 2.
The only way it would be 288 is if it was written:
48/[2(9+3)]
spazzcat
Mar 29, 09:03 AM
At least it works on the market leading platform. ;)
Mortal Kombat jade cosplay 3
Kitana (Mortal Kombat series)
Kitana - Mortal Kombat
I#39;ll Pretend Mileena Said 18
mortal kombat jade cosplay.
mortal kombat jade cosplay.
Series: Mortal Kombat
mortal kombat jade cosplay.
Mortal+kombat+jade+cosplay
mortal kombat jade cosplay.
of Mortal Kombat cosplay.
Mortal Kombat
mortal kombat kitana : COSPLAY
ipxmbx
Apr 7, 12:26 PM
Haters gonna hate.
Just because someone brings up a counterpoint does not make them a hater.
When you use adolescent name calling it kills your image, and destroys your credibility.
A limited vocabulary reveals many things. Anyone can call others names, it doesn't prove a thing.
Just because someone brings up a counterpoint does not make them a hater.
When you use adolescent name calling it kills your image, and destroys your credibility.
A limited vocabulary reveals many things. Anyone can call others names, it doesn't prove a thing.
gnasher729
Aug 7, 02:54 PM
First of all...it seems to me they should have offered a single dual core processor model...like a single 2.6Ghz model for something like $1599. Second why do you only save $300 when you opt for the 2Ghz model but the 3Ghz model costs $800 more???
The 2.66 GHz machine is a bargain. If you pick a different model, Apple will make a bit more money.
The 2.66 GHz machine is a bargain. If you pick a different model, Apple will make a bit more money.
sineplex
Apr 20, 02:03 AM
I also don't understand how some of you think it is possible to have a significantly larger screen without making the phone bigger.
If they make the screen edge to edge it will become 4 inches without any changes to the physical phone dimension.
If they make the screen edge to edge it will become 4 inches without any changes to the physical phone dimension.
2IS
Mar 28, 11:49 AM
I'm strangely ok with this news. Sure, I'd like to have a new iPhone but in all honesty, my iPhone 4 is meeting my needs just fine. If I had a 3GS I'd be more upset about it.
Juan007
Apr 7, 10:58 AM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_2_1 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8C148 Safari/6533.18.5)
Good for Apple. They knew years ago they would be selling millions of iPads so they secured the supply. It pays to be a tech LEADER not a follower. Too bad so sad for all the companies whose tablets weren't conceived until the day after iPad 1 launch.
"Oh you want some LCD, sorry we're out. Apple bought our entire production three years ago."
Good for Apple. They knew years ago they would be selling millions of iPads so they secured the supply. It pays to be a tech LEADER not a follower. Too bad so sad for all the companies whose tablets weren't conceived until the day after iPad 1 launch.
"Oh you want some LCD, sorry we're out. Apple bought our entire production three years ago."
TequilaBoobs
Nov 25, 09:19 PM
i hope apple comes out with a shoe phone, something the pink panther or inspector gadget would use.
ChrisTX
Apr 20, 07:38 AM
You are so right. I'm thrilled with Apple's brainwashed minions, and even happier that I began loading up on Apple stock over a decade ago.
Little did I realize they would bring us shareholders so much wealth. To think that I bought a load of shares when it was under $20 per, then kept adding each year since, brings a huge grin.
At this point everything I buy is nearly free. And when they screw up the masses still buy it. Nothing could be sweeter.
Please enlighten us oh mighty one, on how Apple has "screwed up". After all we're just minions as you claim with no clue about anything, who buys whatever we are told. /sarcasm
Little did I realize they would bring us shareholders so much wealth. To think that I bought a load of shares when it was under $20 per, then kept adding each year since, brings a huge grin.
At this point everything I buy is nearly free. And when they screw up the masses still buy it. Nothing could be sweeter.
Please enlighten us oh mighty one, on how Apple has "screwed up". After all we're just minions as you claim with no clue about anything, who buys whatever we are told. /sarcasm
Amazing Iceman
Apr 25, 09:57 AM
In the meantime, government agencies in a number of countries have launched investigations into the situation, seeking explanations from Apple and details on how users can protect their privacy.
Simple:
- Just as you would do with your wallet and personal record files, don't loose your iPhone or lend it to someone you don't trust.
- Don't hack your iPhone and then install software that could be unsafe.
- Not necessary, but if you are too paranoid disable Location Services.
Protecting your Privacy involves more than just taking care of your iPhone. Someone could call you saying you won a trip to Hawaii, get your personal information, and then you are doomed.
Or when you purchase something, swipe your Credit Card into their device and retrieve most of the private information they need to steal your identity.
So, don't come and make a big issue about the iphone tracking personal info and people's privacy invaded, blah-blah, without a certain proof.
All this hype is nothing more than a publicity stunt .
Simple:
- Just as you would do with your wallet and personal record files, don't loose your iPhone or lend it to someone you don't trust.
- Don't hack your iPhone and then install software that could be unsafe.
- Not necessary, but if you are too paranoid disable Location Services.
Protecting your Privacy involves more than just taking care of your iPhone. Someone could call you saying you won a trip to Hawaii, get your personal information, and then you are doomed.
Or when you purchase something, swipe your Credit Card into their device and retrieve most of the private information they need to steal your identity.
So, don't come and make a big issue about the iphone tracking personal info and people's privacy invaded, blah-blah, without a certain proof.
All this hype is nothing more than a publicity stunt .
slackintosh
Jul 30, 09:53 PM
As the previous post states, the typeface of that add should have caught anyone, apple undertook a subtle identity change around the time it introduced G4 ibooks, most significant was a change in typeface.....
I think the rumour is nothing but a rumour, wasn't it a similar mysterious source who mentioned to a gas station attendant the pending arrival of 42" Plasmas or some $#!+???
I think the rumour is nothing but a rumour, wasn't it a similar mysterious source who mentioned to a gas station attendant the pending arrival of 42" Plasmas or some $#!+???
poppe
Aug 4, 12:04 AM
Please apple what ever you do. Don't leave me stuck with a Merom MBP at 2.16... we need the 2.33!!
CalBoy
May 3, 02:29 AM
Really, most opinions I see in the US to keep the imperial system is because you're not accustomed to it. Fahrenheit being more accurate than Celsius or Kelvins, really? Just add a decimal, that's the beauty of it, you add a decimal point or a factor of ten and Earth doesn't suddenly implode.
I know this sounds incredulous and insulting, but people are terrible at math. The more of it you make them think about (whether it's decimals or fractions or anything else) the worse they perform. It's why you'll see almost every recommended quantity expressed as a whole number. It reduces error for the untrained, and makes expressing the value simpler.
Is it change just for change's sake? Up to you, basically everyone else on Earth made their choice. ;)
Did they really? How many people, after you factor out colonization, dictatorship, and a complete absence of prior standardization, actually switched? I can think of only a few countries, none of which were as large and as diverse as the US is.
Besides, it's not as if sciences and engineering are out of the loop. Only civilian uses are Standard. How does it affect you, a Canadian, if grandma bakes using cups and Fahrenheit?
I think I have to disagree. It may be easier for Americans to grasp the "highs" and "lows" of the Fahrenheit scale, but any European would have a different concept of high and low. Also, the difference in Celsius units is rather insignificant. For example, the difference between 37 and 38 degrees Celsius is 1.8 degrees Fahrenheit, hardly a noticeable difference when it comes to weather forecasts.
No, but 1.8 is a big difference when it comes to taking a baby's temperature or figuring out if your meat is done just right. For a child, 99 is considered a mild fevor and is 37.22. 98.6 is considered "normal" and is 37 flat in C. However, if you had a mother trying to keep track of her child's fever over a period of time, the small variations between those two temps would be a lot more important. The total variation between 99, 99.5, and 100 F is so small on the C scale (37.22, 37.5, 37.77) that it's a lot easier to make mistakes in recording or reporting the results. Sure it's easy to do when it's your job in a professional setting, but lay people make mistakes all the time. Using a scale that makes the number differences larger (and psychologically significant, because you can bet no mother is going to forget that her child has a fever of 100) helps reduce those errors.
I'm not so sure. If a recipe calls for 2 tablespoons, is it not just as easy to measure out 30ml? Might using one graduated measuring "cup" be easier than a series of various-sized spoons and cups? For dry goods, grams are easily measured on a scale. With practice and experience, it's quicker and more precise than measuring exactly three cups of leveled flour: you can just sift the flour into your mixing bowl until the scale reads 375 grams. Indeed this method uses less dishes, too.
There are a lot of measuring cups and spoons that do come graduated these days (no, they're not in the "beyond" section of BBB), but it's not always possible to go by weight. Weight also doesn't solve much because it would add an additional piece of equipment that isn't needed for a lot of recipes. It's also impractical to keep weighing out ingredients, especially if their net weight is going to be in the few grams. You also probably wouldn't save any dishes because flour is usually added into other wet ingredients like butter and sugar separately, so a second bowl would be used regardless.
Other than that, any vessel marked "30ml" used for measuring would essentially be a tablespoon. A rose by any other name, really. Except that the 30ml rose is clunkier to say. In fact, you'd still need names for all of the common measures even using SI. Is everyone really going to go around calling a cup the "237ml vessel?" Are people going to start calling it the "liter quartet of milk?" What would you do for the measures that have a secondary meaning? Will people still be able to call it a "pint" if it's sold as 500ml?
Are there really any benefits to the Customary scale, or do we just perceive benefits because it's what we're used to? And if the latter is the case, why make American students learn two systems of units when one fulfills all needs?
There are some (albeit few these days). For daily tasks, the composite numbers in Imperial units are easy to halve and quarter. This has less relevance today with prepackaged food and digital equipment, but at one time it made practical sense for a lot more uses. The residual benefits are still present in home baking and similar activities where base 10 doesn't help, but those are the few things that still make heavy use of standard units anyhow. I don't think it's that onerous to know these days, especially with apps, Google, and conversion charts everywhere around us.
I know this sounds incredulous and insulting, but people are terrible at math. The more of it you make them think about (whether it's decimals or fractions or anything else) the worse they perform. It's why you'll see almost every recommended quantity expressed as a whole number. It reduces error for the untrained, and makes expressing the value simpler.
Is it change just for change's sake? Up to you, basically everyone else on Earth made their choice. ;)
Did they really? How many people, after you factor out colonization, dictatorship, and a complete absence of prior standardization, actually switched? I can think of only a few countries, none of which were as large and as diverse as the US is.
Besides, it's not as if sciences and engineering are out of the loop. Only civilian uses are Standard. How does it affect you, a Canadian, if grandma bakes using cups and Fahrenheit?
I think I have to disagree. It may be easier for Americans to grasp the "highs" and "lows" of the Fahrenheit scale, but any European would have a different concept of high and low. Also, the difference in Celsius units is rather insignificant. For example, the difference between 37 and 38 degrees Celsius is 1.8 degrees Fahrenheit, hardly a noticeable difference when it comes to weather forecasts.
No, but 1.8 is a big difference when it comes to taking a baby's temperature or figuring out if your meat is done just right. For a child, 99 is considered a mild fevor and is 37.22. 98.6 is considered "normal" and is 37 flat in C. However, if you had a mother trying to keep track of her child's fever over a period of time, the small variations between those two temps would be a lot more important. The total variation between 99, 99.5, and 100 F is so small on the C scale (37.22, 37.5, 37.77) that it's a lot easier to make mistakes in recording or reporting the results. Sure it's easy to do when it's your job in a professional setting, but lay people make mistakes all the time. Using a scale that makes the number differences larger (and psychologically significant, because you can bet no mother is going to forget that her child has a fever of 100) helps reduce those errors.
I'm not so sure. If a recipe calls for 2 tablespoons, is it not just as easy to measure out 30ml? Might using one graduated measuring "cup" be easier than a series of various-sized spoons and cups? For dry goods, grams are easily measured on a scale. With practice and experience, it's quicker and more precise than measuring exactly three cups of leveled flour: you can just sift the flour into your mixing bowl until the scale reads 375 grams. Indeed this method uses less dishes, too.
There are a lot of measuring cups and spoons that do come graduated these days (no, they're not in the "beyond" section of BBB), but it's not always possible to go by weight. Weight also doesn't solve much because it would add an additional piece of equipment that isn't needed for a lot of recipes. It's also impractical to keep weighing out ingredients, especially if their net weight is going to be in the few grams. You also probably wouldn't save any dishes because flour is usually added into other wet ingredients like butter and sugar separately, so a second bowl would be used regardless.
Other than that, any vessel marked "30ml" used for measuring would essentially be a tablespoon. A rose by any other name, really. Except that the 30ml rose is clunkier to say. In fact, you'd still need names for all of the common measures even using SI. Is everyone really going to go around calling a cup the "237ml vessel?" Are people going to start calling it the "liter quartet of milk?" What would you do for the measures that have a secondary meaning? Will people still be able to call it a "pint" if it's sold as 500ml?
Are there really any benefits to the Customary scale, or do we just perceive benefits because it's what we're used to? And if the latter is the case, why make American students learn two systems of units when one fulfills all needs?
There are some (albeit few these days). For daily tasks, the composite numbers in Imperial units are easy to halve and quarter. This has less relevance today with prepackaged food and digital equipment, but at one time it made practical sense for a lot more uses. The residual benefits are still present in home baking and similar activities where base 10 doesn't help, but those are the few things that still make heavy use of standard units anyhow. I don't think it's that onerous to know these days, especially with apps, Google, and conversion charts everywhere around us.
NebulaClash
Apr 25, 10:21 AM
News Flash:
He's a Liar.
News Flash: You just lied about Steve Jobs.
He's a Liar.
News Flash: You just lied about Steve Jobs.
Multimedia
Jul 23, 01:53 PM
I was wondering where you heard that there is going to be a 4 core mobile version of Merom coming Fall '07. Any roadmaps i've read for intel, including that one you linked to (and the Tom's Hardware one) don't mention it. In fact, I didn't even read of a desktop 4 core processor being released until let alone 2007 in a laptop.
Desktop 4 core processors with 8 MiB L2 cache - called Kentsfield are now planned for release in 4th quarter of this year 2006. Desktop 8 core processors with 12 MiB L2 cache - called Yorkfield are planned for next Spring 2007.
On the server-worstation front these are the planned processors coming next year and in 2008:
Woodcrest, first eighth-generation server and workstation chip, 65 nm, dual-core, 4 MiB L2 cache (Released on June 26, 2006)
Clovertown, quad-core MCM, consists of two Woodcrests, with 2 × 4 MiB L2
Tigerton, quad-core MCM. MP-capable version of Clovertown.
Harpertown, either a dual-core, 45 nm shrink of Woodcrest, or an eight-core, 45 nm MCM with 12 MiB L2
Dunnington, four to thirty-two cores, successor to Tigerton
I'm wondering where you heard this because I'm getting a MBP for college next summer and if there were quad core MBPs coming out in the fall I would wait.
(Oh, and if I misinterpreted 4 cores to equal Quad core on a single processor, please clarify what you meant.)4 Mobile Cores In One MBP by end of 2007 Is An Expectation Not A Known Fact. Obviously Intel is not going to project that possability until it knows it can do it sometime next year either possibly by end of 2007 or almost certainly by end of 2008. Sorry for the certain tone of my mention. I put a smillie after that sentence to indicate it was sort of a hopeful joke. :)
We will all have to wait for the '07 WWDC next summer to tell what's going on for the mobile Macs then. Way too early to tell now. I would just be as patient as possible before you have to pull the trigger for school in the fall of '07. In other words, don't put any weight into my hopeful expectation for 4 cores in a mobile Mac by two years from now.
I think it will depend on how well the 45nm production process develops as to how soon Intel will feel confident they can put 4 mobile cores with 12-16 MB of L2 cache in one piece of 45nm silicon and still keep it cool and energy efficient. This is a long term hope and dream for me, nothing substantiated by any sources. Not fantasy. But a realistic hopeful expectation that will most likely be fulfilled in 3 years worst case after Core 3 comes to market which will be about 2 years from now. :)
Each of these Core Families has a life expectancy of about two years of reign plus the half year preceeding early deployment and ramp up.
Core 2 - late 2006-2008
Core 3 - late 2008-2010
Core 4 - late 2010-2012
etc.
And each Family represents significant changes in both the processor architecture and the manufacturing process. We will have to see how the Intel long range plan unfolds as planned or not as planned to determine what will be available in long range future. IE - nobody knows for sure. Right now I can't see beyond a 2.33 GHz Merom with the Santa Rosa support set + 802.11n and 10-Gigabit Ethernet next Spring. Can anyone else here see further?
Desktop 4 core processors with 8 MiB L2 cache - called Kentsfield are now planned for release in 4th quarter of this year 2006. Desktop 8 core processors with 12 MiB L2 cache - called Yorkfield are planned for next Spring 2007.
On the server-worstation front these are the planned processors coming next year and in 2008:
Woodcrest, first eighth-generation server and workstation chip, 65 nm, dual-core, 4 MiB L2 cache (Released on June 26, 2006)
Clovertown, quad-core MCM, consists of two Woodcrests, with 2 × 4 MiB L2
Tigerton, quad-core MCM. MP-capable version of Clovertown.
Harpertown, either a dual-core, 45 nm shrink of Woodcrest, or an eight-core, 45 nm MCM with 12 MiB L2
Dunnington, four to thirty-two cores, successor to Tigerton
I'm wondering where you heard this because I'm getting a MBP for college next summer and if there were quad core MBPs coming out in the fall I would wait.
(Oh, and if I misinterpreted 4 cores to equal Quad core on a single processor, please clarify what you meant.)4 Mobile Cores In One MBP by end of 2007 Is An Expectation Not A Known Fact. Obviously Intel is not going to project that possability until it knows it can do it sometime next year either possibly by end of 2007 or almost certainly by end of 2008. Sorry for the certain tone of my mention. I put a smillie after that sentence to indicate it was sort of a hopeful joke. :)
We will all have to wait for the '07 WWDC next summer to tell what's going on for the mobile Macs then. Way too early to tell now. I would just be as patient as possible before you have to pull the trigger for school in the fall of '07. In other words, don't put any weight into my hopeful expectation for 4 cores in a mobile Mac by two years from now.
I think it will depend on how well the 45nm production process develops as to how soon Intel will feel confident they can put 4 mobile cores with 12-16 MB of L2 cache in one piece of 45nm silicon and still keep it cool and energy efficient. This is a long term hope and dream for me, nothing substantiated by any sources. Not fantasy. But a realistic hopeful expectation that will most likely be fulfilled in 3 years worst case after Core 3 comes to market which will be about 2 years from now. :)
Each of these Core Families has a life expectancy of about two years of reign plus the half year preceeding early deployment and ramp up.
Core 2 - late 2006-2008
Core 3 - late 2008-2010
Core 4 - late 2010-2012
etc.
And each Family represents significant changes in both the processor architecture and the manufacturing process. We will have to see how the Intel long range plan unfolds as planned or not as planned to determine what will be available in long range future. IE - nobody knows for sure. Right now I can't see beyond a 2.33 GHz Merom with the Santa Rosa support set + 802.11n and 10-Gigabit Ethernet next Spring. Can anyone else here see further?
Multimedia
Aug 3, 11:49 PM
I'm gonna go on record and say they will NOT intro new MBP at wwdc. Some sales of the current MBP are better than none and if they they intro a new one they will not sell any and probably just take pre orders. Not gonna happen. They will wait until late August or early September to announce them when they are actually ready.Steve does not have to announce any new products to say they are going to shift to Core 2 across the board ASAP. :)
ivladster
Apr 18, 04:18 PM
The fact that they are now suing Samsung, and waited this long, might give validity to this theory, as they did not want to sue them while Sammy was still a key supplier for them.
Something to think about.
Actually Apple just recently got granted those designs for iOS and iPhone 3GS, they were waiting for US Patent Office to approve them.
Something to think about.
Actually Apple just recently got granted those designs for iOS and iPhone 3GS, they were waiting for US Patent Office to approve them.
ehoui
May 6, 08:45 AM
Yes, you are correct - once you are in science or engineering. But how many children never get there because of a system that over-complicates even simple calculations. All it takes is a couple of bad years/teachers/experiences to put a kid totally off of math. Truly brilliant kids will likely overcome these set-backs, but most kids are not brilliant.... they are good to competent. And good to competent engineers are needed as much as the ones who put landers on the Mars... oh, wait wasn't there a problem with one of those that involved non-metric measurements? (what is the smiley for "snarky" and "tongue in cheek"?)
I can understand the intuitive justification of this argument, but I'd like to see something more rigorous before I accept it. My own intuitive sense is that learning measurement systems, while important to early child development, don't, in of themselves (i.e., imperial or metric), have a causal relationship with math and science success (or failure) in school. I think there are other much stronger factors to success in math and engineering. One example: "male malaise" in the UK and the USA (a general problem in elementary and secondary schools); also, public school math programs are not rigorous and set the bar relatively low.
I can understand the intuitive justification of this argument, but I'd like to see something more rigorous before I accept it. My own intuitive sense is that learning measurement systems, while important to early child development, don't, in of themselves (i.e., imperial or metric), have a causal relationship with math and science success (or failure) in school. I think there are other much stronger factors to success in math and engineering. One example: "male malaise" in the UK and the USA (a general problem in elementary and secondary schools); also, public school math programs are not rigorous and set the bar relatively low.
FluJunkie
Apr 22, 01:08 AM
And how do you operate it? A server can be accessed from a workstation but a Mac Pro IS a workstation, it's not a server. It's not a logical step. I have a professional photographer in the family, with a Mac Pro. He needs to load his RAWs onto his Mac for post processing. How to do this if that Mac is in another room, in a rack :confused: Very inconvenient if you ask me.
It is trivial, in say my case, to SSH into a "workstation" type Mac Pro, say "Noble Mac Pro, run this really computational intensive code, I'll check back in a bit" and then SSH the output back to another machine when it's done. No muss, no fuss.
Now imagine you have bunches of workstations...
It is trivial, in say my case, to SSH into a "workstation" type Mac Pro, say "Noble Mac Pro, run this really computational intensive code, I'll check back in a bit" and then SSH the output back to another machine when it's done. No muss, no fuss.
Now imagine you have bunches of workstations...
Yank in UK
May 8, 06:50 AM
This is easy to see
MobilMe Becomes Free
MobilMe gets laden with 1Ads
All part of the Apple strategy
I would be happy to keep paying $99/year for adfree Mobilme
MobilMe Becomes Free
MobilMe gets laden with 1Ads
All part of the Apple strategy
I would be happy to keep paying $99/year for adfree Mobilme
